Relative Molecular mass:426.68
Application Guide:
1.DOS is an excellent cold-resistant plasticizer, with high plasticizing efficiency, high stability and low volatility. Except good cold-resistance, it also has good heat-resistance, light-resistance, electric and insulation, suitable for PVC, EVC, polystyrene and synthetic rubber resins.
2. Especially suitable for the production of cold-resistant wire, cable material, luxury food, meat plastic wrap, artificial leather, thin film, conveyer belt, board, sheet, etc. Usually be used with PA esters.
3. As the low-temperature plasticizer for synthetic rubbers, DOS has no effect on the vulcanization of rubber.
Product Standards：
|
NO. |
Test Item |
Superior Grade |
First Grade |
Qualified Grade |
Our typical Value |
|
1 |
Appearance |
Transparent Oily liquid without visible impurity |
Transparent Oily liquid without visible impurity |
Transparent Oily liquid without visible impurity |
Transparent Oily liquid without visible impurity |
|
2 |
Chroma,(Platinum-Cobalt) |
≤20 |
≤30 |
≤60 |
≤20 |
|
3 |
Ester content |
≥99.5 |
≥99.0 |
≥99.0 |
≥99.5 |
|
4 |
Density（20°），g/cm3 |
0.913-0.917 |
0.913-0.917 |
0.913-0.917 |
0.913-0.917 |
|
5 |
Acid value |
≤0.04 |
≤0.07 |
≤0.10 |
≤0.04 |
|
6 |
Flashing Point |
≥215 |
≥210 |
≥205 |
≥215 |
|
7 |
Moisture content |
≤0.05 |
≤0.05 |
≤0.10 |
≤0.05 |
Relative Molecular mass:426.68
Application Guide:
1.DOS is an excellent cold-resistant plasticizer, with high plasticizing efficiency, high stability and low volatility. Except good cold-resistance, it also has good heat-resistance, light-resistance, electric and insulation, suitable for PVC, EVC, polystyrene and synthetic rubber resins.
2. Especially suitable for the production of cold-resistant wire, cable material, luxury food, meat plastic wrap, artificial leather, thin film, conveyer belt, board, sheet, etc. Usually be used with PA esters.
3. As the low-temperature plasticizer for synthetic rubbers, DOS has no effect on the vulcanization of rubber.
Product Standards：
|
NO. |
Test Item |
Superior Grade |
First Grade |
Qualified Grade |
Our typical Value |
|
1 |
Appearance |
Transparent Oily liquid without visible impurity |
Transparent Oily liquid without visible impurity |
Transparent Oily liquid without visible impurity |
Transparent Oily liquid without visible impurity |
|
2 |
Chroma,(Platinum-Cobalt) |
≤20 |
≤30 |
≤60 |
≤20 |
|
3 |
Ester content |
≥99.5 |
≥99.0 |
≥99.0 |
≥99.5 |
|
4 |
Density（20°），g/cm3 |
0.913-0.917 |
0.913-0.917 |
0.913-0.917 |
0.913-0.917 |
|
5 |
Acid value |
≤0.04 |
≤0.07 |
≤0.10 |
≤0.04 |
|
6 |
Flashing Point |
≥215 |
≥210 |
≥205 |
≥215 |
|
7 |
Moisture content |
≤0.05 |
≤0.05 |
≤0.10 |
≤0.05 |
